«UMC» LLC produces electric-welded steel pipes and closed profiles of HR and galvanized strip of its own production. The steel pipe product catalogue is represented by profiles, round and shaped pipes.
Square shaped pipe GOST 8639-82

Dimensions: Side of a square is from 40 to 100 mm. Wall thickness is from 1.5 to 4 mm.
Mechanical properties: According to GOST 13663-86. Tolerances on dimensions shall be as specified in GOST 8639-82 requirements.
Rectangular shaped pipe GOST 8645-68

Dimensions: Height and width range from 25×50 mm to 60×140 mm. Wall thickness is from 1.5 to 4 mm.
Mechanical properties: According to GOST 13663-86. Tolerances on dimensions are specified in GOST 8639-82, tolerances are the same for pipes of rectangular and square section.
Steel pipe for gas and water GOST 3262-75

Dimensions: Nominal diameter is from 40 to 125 mm. Wall thickness of steel pipe products is from 1 to 4.5 mm.
Mechanical properties: The mechanical properties and chemical composition are not standardized but manufacturer takes into account standard requirements and technological regulations established for steel grades according to GOST 380-2005 and GOST 1050-2013.
Electric-welded pipe GOST 10704-91

Dimensions: Outer diameter is from 48 to 152 mm. Wall thickness is from 1 to 4.5 mm.
Mechanical properties: Specifications of steel pipes as per GOST 10704-91 are regulated by GOST 10705-80.
Closed profile GOST 30245-2012

Dimensions: Square section is from 40 to 100 mm. Height and width of rectangular section profile range from 25х50 to 60х140 mm. Wall thickness is from 1,5 to 4 mm.
Mechanical properties: Mechanical properties are regulated by par. 5.6 of GOST 30245-2012.
TYPES OF PRODUCTS:
